亚洲性精品,91在线最新,成全视频在线播放

Product Navigation

Path: Home> Product Class> IEC60529 IP CODE TESTING > IEC 60529 IPX5 IPX6 Strong Water Spray Testing Equipment>

Product Details

查看大图

Product name：IEC 60529 IPX5 IPX6 Hose Nozzles Strong Water Spray Test Chamber
Product number：CX-IPX56B
Product manufacturer：Chuangxin
Product documentation：

你添加了1件商品查看购物车

a brief introdction：

Ipx5 ipx6 water spray test device Drop rain rain chamber Uses: This equipment is main to test the physical and other related properties of the products in the environment of simulated rain, such as electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and components. After the test, through the test result to determine

Details description：

IEC 60529 IPX5 IPX6 Hose Nozzles Strong Water Spray Test Chamber

Complied Standards & Clauses

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX5 & IPX6.

Equipment Overview

Structure: The test equipment consists of a water jet mechanism, an electrical control cabinet and a turntable. The water jet mechanism is mounted in the left side of inner chamber, the injection channel is sealed with a stainless-steel case. The sample is placed on the turntable, the turntable is caused to rotating by motor driving at a rotation speed of 1r/min, to make the enclosure is sprayed from all practicable directions with a stream of water from the standard test nozzles. This whole system adopts the chamber type structure.

Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water jets at degree IPX5 and IPX6.

Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, communication products, household appliances, outdoor lighting and signal devices, etc

Principle: Ensure that the water jet speed reaches the standard required value by controlling the water supply flow, the enclosure is sprayed from all practicable directions with a stream of water from a standard test nozzle as shown in IEC 60529 figure 6.

Use Environment:

Power supply: AC380V±5%/50Hz, 5KVA, or match client’s local power supply requirements.

Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting and waterproof leakage switch (or socket), the ground needs to be flat, and the water intake and drainage function should be good.

Water source: clean water or tap water without impurities, equipped with water cleaning filter.

Technical Parameters

Control & Operation PLC and touch screen intelligent control system

Chamber Size
Inner size: WDH=800×800mm×800mm
Outer size: WDH=3800×1380mm×1750mm

Jet Direction Horizontal

Nozzle Internal Diameter IPX5:Ф6.3mm; IPX6:Ф12.5mm

Water Jet Flow Rate IPX5: 12.5±0.625L/min; IPX6: 100±5 L/min, Manually adjustable (rotameter)

Water Jet Distance 2.8m ((The distance from the nozzle to the center surface of the turntable, standard requires 2.5-3m)

Fixing Method for Nozzles Mechanically fixed to the supports

Pressure Gauge 0~0.25MPa, can be displayed

Test Duration 0.01S～99.9min, can be preset on the touch screen

Turntable Diameter: Φ400mm, rotation speed: 1r/min, bearin capacity: ≤50kgs

Water Circulation System The test is processed in the chamber, the equipment has a bilt-in water tank, the water can be recycled. And the inner chamber has a water collecting device, the test spraying and splashing water is automatically collected into the water storage tank through the chassis. The water inlet can be automatically controlled through the float valve in the water tank, the system can give out high and low water level alarm detection alarms, which can effectively prevent the pump from being damaged due to dry water shortage. Also, there is a cleaning filter device at the water inlet position.

Safety Protection Phase sequence protection, leakage protection, water shortage protection, abnormal protection.

Control & Operation	PLC and touch screen intelligent control system
Chamber Size	Inner size: WDH=800×800mm×800mm Outer size: WDH=3800×1380mm×1750mm
Jet Direction	Horizontal
Nozzle Internal Diameter	IPX5:Ф6.3mm; IPX6:Ф12.5mm
Water Jet Flow Rate	IPX5: 12.5±0.625L/min; IPX6: 100±5 L/min, Manually adjustable (rotameter)
Water Jet Distance	2.8m ((The distance from the nozzle to the center surface of the turntable, standard requires 2.5-3m)
Fixing Method for Nozzles	Mechanically fixed to the supports
Pressure Gauge	0~0.25MPa, can be displayed
Test Duration	0.01S～99.9min, can be preset on the touch screen
Turntable	Diameter: Φ400mm, rotation speed: 1r/min, bearin capacity: ≤50kgs
Water Circulation System	The test is processed in the chamber, the equipment has a bilt-in water tank, the water can be recycled. And the inner chamber has a water collecting device, the test spraying and splashing water is automatically collected into the water storage tank through the chassis. The water inlet can be automatically controlled through the float valve in the water tank, the system can give out high and low water level alarm detection alarms, which can effectively prevent the pump from being damaged due to dry water shortage. Also, there is a cleaning filter device at the water inlet position.
Safety Protection	Phase sequence protection, leakage protection, water shortage protection, abnormal protection.

在线视频观看一区_国产精品一区二区三_91tv永久入口_91社区在线观看_公交车上被强入_91成人区

Product name：IEC 60529 IPX5 IPX6 Hose Nozzles Strong Water Spray Test Chamber

IEC 60529 IPX5 IPX6 Hose Nozzles Strong Water Spray Test Chamber