Basic Introduction:

1, According to: IEC61032:1997/IEC60529:2001 AND UL

2, IP3X Test Probe C ( Test Probe C)  is the necessary tool to proceed protecting electric shock test of domestic and similar electrical appliances.

 Technical parameters :

1.  Test Probe Length :100mm

2.  Test Probe Diameter:2.5mm

3.  Dam- sphere Diameter:35mm

4.  Handle Diameter:10mm

5.  Handle Length 100mm

6.  According to IEC61032 figure 3 (the Test probe C), table 6.

Application:

1,  Standard test refers to the joint part can't touch the live parts or close to the hazardous parts, and 35mm circular baffle cannot enter .

2,  In the test requirement for preventing from approaching to the hazardous parts,  Test Probe C/D need to exert a 3±0.3N or 1±0.1N force. 

Purpose:

This probe is aiming at verifying the basic protection against approaching to hazardous parts.

 Note:For the without force products,please use with the dynamometer.