-
IEC 62368 Test Equipment
- IEC60529 IP CODE TESTING...
-
IEC60335-1 Testing equip...
-
Flammability Test Chambe...
-
IEC60884-1Testing Equipm...
- Accessibility Probes
-
Impact Testing
-
IEC60061-3 lamp gauge
-
Electric Safety Tester
-
Environment Test Chamber
-
UL Testing equipment
-
LED Test Instruments
-
Plug, Socket & Switch Te...
-
Oscilloscope
-
Electronic Components Te...
-
Force Meter
-
Tensile Testing Machine
-
Other product
-
Plug and Socket Gauges
celebrate cooperate with UK client again for glow wire tester needle flame test
celebrate cooperate with UK client again for glow wire tester needle flame test
Our UK customer bought 1 set of glow wire test chamber, needle flame tester and IEC60529 IPX3/4 Oscillating rain waterproof test chamber in Nov 2015. It's our old clients, and will cooperate with us about other test instrument in the near future.
Product details as below:
IEC60695-2-1 Glow Wire Test Equipment
Glow Wire Test Equipment is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products, etc.
Specification:
?
Heating temperature: adjustable continuously within the range of
≤500-1000°C, the accuracy of temperature is 1°C, the resolution of
temperature is ±3°C
? Glowing time: 0.1~999.9s, ±0.1s(time range is adjustable)
? Burning time: 0.1~999.9s, auto record and manual pause
? Flame chilling time: 0.1~999.9s, auto record and manual pause
? Glow wire pressure on test specimen: 1±0.2N. Limiting pressure depth is 7mm
? Glow wire: diameter is 4mm include nickel(80%) and chromium (20%) which made in specific dimensions
? Thermoelectric couple: φ0.5 armored nickel & chromium/nickel-chromium wire, K degree
? Auto break away: While reaching specified glowing time, test specimen will break away from glow wire automatically
? Working power supply: AC220V/50Hz and less than 500W
? Overall dimension: W1120mm×D520mm×H1250mm
IEC60695 Needle Flame Tester for Material Burning Test
1.Needle Flame Tester meets IEC60695-2-2 and IEC60695-11-5
2.can measure kind of materials
According to IEC60695-2-2 and IEC60695-11-5, Needle Flame Tester is applied in the production and quality control department of lighting instrument, hypopiesis electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, it is fit for the industry of insulation material, engineering plastics and solid combustible material.
Technical Parameters
|
Burner Angel |
0°, 20°,45° |
|
Flame Height |
12±1mm |
|
Needle burner |
Height above 35mm, Stainless steel needle Φ0.9mm-Φ0.5mm |
|
Standard Copper Block |
0.58±0.01g |
|
Check time |
23.5±1S |
|
Temperature Test |
MAX1050°C ±0.1% |
|
Thermocouple |
RS (British), Type KΦ0.5, accuracy ±0.05% |
|
Gas variety |
Butane or purity above 95%,Propane
|
IEC60529 IPX3/4 Oscillating rain pipe waterproof test chamber
Application
The
IPX3/4 rain pipe test device is strictly designed according to
IEC60529. It’s applied to the Electrical equipment of the waterproof
test of IPX3 and IPX4.
Technology Parameter
Power Supply
Single phase: AC220V, 50Hz
Swing Pipe diameter
19mm, thickness 2mm
Swing Pipe radius
R800 (304 stainless steel)
Orifice diameter
0.4mm
Orifice angle
IPX3: 120°;
IP4X: 180°
Pendulum Angle
IPX3: 120°(±60°);
IPX4: 360°(±180°)
Swing Pipe Speed
EPX3: 4s/time (2x120°)
IP4X: 12s/time (2x180°)
Water discharge
1-10L/min, adjustable
Test time
0-999mins, can preset
Swivel table diameter
700mm
Swivel table speed
(1-5) rpm
Tiltable Angle
15°
Swivel table rotation angle
900°,continuous rotation
Pressure Gage
0~0.25MPa
The
tubes oscillate to almost 180 ° either side of vertical. The degree of
oscillation can be set on the touch screen controller or one of the
three pre-set values, 90 ° , 120 ° , or almost 180 ° , can be selected.
A
specimen support is also included. It is supplied with two specimen
bases - one perforated for IPX4 and one non-perforated for IPX3. The
support is made from stainless steel and mounted on wheels for easy
maneuverability and adjustment. It offers height adjustments that range
from 855mm to 1300mm. The oscillating tubes are manufactured with orifice radii of 200 mm to 1600 mm with a progressive ratio of 200 mm.
